概述：

名稱：聚氨酯催化劑SMP
別名：聚氨酯催化劑SMP，催化劑SMP，胺催化劑SMP，延遲催化劑SMP，硬泡催化劑SMP
SMP是低密度海綿或模塑專用延遲催化劑，可以增加泡沫硬度，特別適合用于密度在6-25kg/kg范圍的海綿中，同時可提高泡沫硬度5-10%；
由于SMP可提高海綿的硬度，如果要保持同一硬度的話，可減低異氰酸指數大約2至3點，這樣在經濟角度來說是非常合算的；
無論是在MC配方，還是在有填料（CaCO3和三聚氰胺）的配方中SMP都可以改善泡棉的工藝性，減少開裂；
 
用途：
SMP廣泛的用在軟質塊狀泡沫塑料和熱固化模塑中，推薦添加量：0.15-0.2 pphp。

 
儲運：
應密封保存，儲存于干燥陰涼通風倉庫內
 
包裝：
180KG/桶 貯存：建議存儲在干燥和涼爽的地區并進行適當通風。原包裝后請盡快扣緊包裝蓋，以防水分等其他物質的混入而影響產品性能。不要吸入粉塵， 避免皮膚和黏膜接觸。工作場所禁止吸煙、進食和飲水。工作后，淋浴更衣。單獨存放被污染的衣服，洗后再用。保持良好的衛生習慣。

Amine catalyst SMP

Name：Polyurethane catalyst SMP，catalyst SMP, amine catalyst SMP, delayed catalyst SMP, hard foam catalyst SMP

SMP is a low-density sponge or a special delayed catalyst for molding, which can increase the hardness of foam. It is especially suitable for sponges with a density of 6-25kg/kg, and can increase the hardness of foam by 5-10%.

Since SMP increases the hardness of the sponge, it can reduce the isocyanate index by about 2 to 3 points if the same hardness is maintained, which is very economical from the perspective of economy;

Whether in MC formula, or in the formula with fillers (CaCO3 and melamine) SMP can improve the process of foam, reduce cracking;

USES:

SMP is widely used in soft bulk foams and thermal-curing moulding compounds. Recommended dosage: 0.15-0.2 PPHP.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

180KG/ b storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the cover as soon as possible after the original packaging to prevent moisture and other substances from affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking water are prohibited in the workplace. Shower and change after work. Store contaminated clothing separately and reuse after washing. Keep good hygiene.

東莞廣思遠聚氨酯材料有限公司成立于2009年，我司是一家生產與貿易相結合的企業，專業生產復配各類型軟硬泡胺催化劑；復配各類型聚氨酯抗黃變劑，抗氧劑，抗燒心劑，聚氨酯脫模劑；代理銷售聚氨酯軟泡硅油和其它功能性輔助材料。公司經過近十年的發展，在聚氨酯輔料細分領域取得了較好的進步，從一個默默無聞的企業發展成在行業內享有一定知名度的企業，我司在2014年取得了ISO9001質量認證體系，恒久穩定的產品質量是公司成長的基礎，我司復配生產的各類型聚氨酯原料基本采用國際性大公司的單體原料，并同亨斯邁、美國邁圖、陶氏化學、贏創德固賽、巴斯夫等國際化學巨頭有著較為深入的合作，使得我司在整個聚氨酯原料體系中擁有較為完整的輔料供應。這也是我司產品質量信譽的保證。